Cisco CableCARD, Руководство по эксплуатации

Страница: 85 / 184

Verifying the Staging Process
734375 Rev H 75
Verifying the Staging Process
After the staging process is complete, use the following checklist to check each
DHCT and confirm that the staging process was correctly completed.
1 Verify that the correct current time appears on the front panel LED (if equipped
with front-panel alphanumeric LEDs).
2 Verify that the DHCT is receiving audio and video on the following channels:

Analog channels (if supported)

Digital channels

Premium channels
3 Verify that the IPG channel banner is available on the bottom of the screen.
4 View Page 4 of the diagnostic screens and verify that the ENTITLEMENT
AGENTS / ISE[1] field displays
0x0000001 .
5 View Page 6 of the diagnostic screens and verify that the date in the
SUB EXPIRES field is at least 30 days in the future.
6 If you are staging field-return or RMA DHCTs, use the Staging Toolkit to verify
the following settings. See
Returning DHCTs and CableCARD Modules to
Service (on page 87) for more information.

The Boot Status Indicator displays 111

All personal settings have been cleared and current site defaults are set

There are no stranded IPPV events