4-12
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
OL-4804-01
Chapter 4 Basic and Additional H.323 Services
Complete Reference Table of all Cisco ATA H.323 Services
Selecting H.323 Connection and H.245 Transmission Methods
You can configure the H.323 connection method and the H.245 transmission method. Use Bit 0 of the
ConnectMode parameter to select either the slow-start procedure or the fast-start procedure for the H.323
connection. Use Bit 1 of the ConnectMode parameter to select either a separate H.245 connection or
H.245 tunneling for H.245-message transmission.
Related Configuration Parameter
ConnectMode, page 5-32
—Bits 0 and 1
Setting Dial Plans
You can set specific dial plan rules and timeout values. Many of these values are determined on a
country-by-country basis.
Related Parameter
DialPlan, page 5-52
Complete Reference Table of all Cisco ATA H.323 Services
Table 4-4
is a reference table that lists all configurable features for the Cisco ATA (using H.323), and
includes links to the detailed descriptions of the parameters used for configuring these features.
Table 4-4
Configurable Features and Related Parameters
Configurable Features
Related Parameters
Audio Media Features
•
Low bit-rate codec selection (G.723.1, G.729)
•
Silence suppression
•
RTP media port
•
Preferred audio codec for transmitting and
receiving voice data
•
RTP packet size
Audio Media Parameters
•
LBRCodec, page 5-23
•
AudioMode, page 5-24
•
MediaPort, page 5-21
•
TxCodec, page 5-22
,
RxCodec, page 5-22
•
NumTxFrames, page 5-25
Audio cut-through configuration
ConnectMode, page 5-32
Caller ID format
CallerIdMethod, page 5-38
DTMF and hookflash transmission methods
AudioMode, page 5-24
Debug and Diagnosis
NPrintf, page 5-61
Dial plans
DialPlan, page 5-52
Fax Services Features
•
Fax services mode selection
•
Named Signaling Event (NSE) payload type for
fax pass-through
Fax Services Parameters
•
AudioMode, page 5-24
,
ConnectMode,
page 5-32
•
ConnectMode, page 5-32
