5-28
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for H.323 (version 3.0)
OL-4804-01
Chapter 5 Parameters and Defaults
Operational Parameters
PaidFeatures
Description
Unsubscribe/subscribe to CallFeatures by setting each corresponding bit to either 0 or 1. The lower 16
bits are for the
Phone 1
port, and the upper 16 bits are for the
Phone 2
port.
Table 5-3
provides
definitions of each bit.
Value Type
Bitmap
Default
0xffffffff
Voice Configuration Menu Access Code
315
Related Parameters
•
CallFeatures, page 5-27
•
CallCmd, page 5-29
•
CallerIdMethod, page 5-38
•
SigTimer, page 5-31
12-14
and
28-30
Reserved.
15 and 31 Fax mode. This service allows the user to set the Cisco ATA to Fax mode on a per-call basis. For Fax mode, use
the following settings:
•
G711 codec only
•
No silence suppression
•
No FAX tone detection
Table 5-2
CallFeatures Parameter Bit Definitions (continued)
Bit
Number
Definition
Table 5-3
PaidFeatures Parameter Bit Definitions
Bit Number
Definition
0 and 16
Not used for H.323.
1 and 17
Not used for H.323.
2 and 18
Not used for H.323.
3 and 19
Caller Line Identification Restriction (CLIR)—0; Caller Line Identification Presentation (CLIP)—1
4 and 20
Call waiting
5 and 21
Three-way calling
