Cisco ASR-920-12SZ-A Скачать руководство пользователя страница 21

Страница: 21 / 76

SFP+ Condition

SFP+ LED

Loss of signal, fault, or link down.

Orange

Activity in 10G mode.

Blinking green

SFP module is not supported.

Off

Fan Module

There are seven fixed fans that provide front-to-back airflow. The system is designed to operate at its maximum
operating temperature of 70º C. It is designed to operate at 65º C in case of failure of a single fan, for a
maximum of four hours.

Licensing the Router

The Cisco ASR-920-12SZ routers support the following licenses:

• Port Licensing—Port Upgrade license is available as a "Pay as you Grow" model.

• 10G upgrade license

The Cisco ASR-920-12SZ routers do not support 1G port upgrade licenses.

Note

• Timing license (1588)—Timing license is required if the router is used as a master clock.

• Advanced Metro IP Access (Default)

• Metro IP Access

• Metro Access

• Cisco Smart Licensing—Smart Licensing is usage-based licensing where devices register with the Cisco

Secure server.

Cisco ASR-920-12SZ-A and Cisco ASR-920-12SZ-D Aggregation Services Router Hardware Installation Guide

Overview

Fan Module

Содержание ASR-920-12SZ-A












































































Результаты поиска

Содержание ASR-920-12SZ-A

Отзывы:

Похожие инструкции для ASR-920-12SZ-A

Бренды по названию

Популярные бренды

Cisco ASR-920-12SZ-A, Руководство по установке оборудования

Результаты поиска

Содержание ASR-920-12SZ-A

Отзывы:

Похожие инструкции для ASR-920-12SZ-A

Бренды по названию

Популярные бренды