The output display in this example shows that the SPA in subslot 0/1 is disabled because one of the
programmable devices does not meet the minimum version requirements.
Router#
show hw-module all fpd
==== ====================== ====== =============================================
H/W
Field Programmable
Current
Min. Required
Slot Card Type
Ver.
Device: "ID-Name"
Version
Version
==== ====================== ====== ================== =========== ==============
0/0 SPA-4XOC3-POS
1.0
1-I/O FPGA
3.4
3.4
---- ---------------------- ------ ------------------ ----------- --------------
0/1 SPA-2XT3/E3 <DISABLED>
1.0
1-ROMMON
2.12
2.12
2-I/O FPGA
0.6
1.0
*
3-E3 FPGA
1.0
1.4
*
4-T3 FPGA
1.0
1.4
*
---- ---------------------- ------ ------------------ ----------- --------------
0/2 SPA-1X10GE-L-V2
1.0
1-10GE I/O FPGA
1.9
1.9
---- ---------------------- ------ ------------------ ----------- --------------
0/3 SPA-1X10GE-L-V2
1.0
1-10GE I/O FPGA
1.9
1.9
==== ====================== ====== =============================================
NOTES:
- FPD images that are required to be upgraded are indicated with a '*'
character in the "Minimal Required Version" field.
- The following FPD image package file is required for the upgrade:
asr1000-fpd-bundle.pkg
==== ====================== ====== =============================================
Displaying Information About the Default FPD Image Package
You can use the
show upgrade fpd package default
command to find out which SPAs are supported with
your current Cisco IOS release and which FPD image package you need for an upgrade.
Router#
show upgrade fpd package default
****************************************************************************
This Cisco IOS software image requires the following default FPD Image
Package for the automatic upgrade of FPD images (the package is available
from Cisco.com and is accessible from the Cisco Software Center page where
this IOS software image can be downloaded):
****************************************************************************
Version: 12.2(XN)
Package Filename: asr1000-fpd-bundle.pkg
List of card type supported in this package:
Minimal
No. Card Type
HW Ver.
---- ---------------------------------------- -------
1) 4xT SERIAL SPA
0.0
2) 1xCHSTM1 SPA
0.0
3) 2xCT3 SPA
0.100
4) 2xCT3 SPA
0.200
5) 4xCT3 SPA
0.100
<additional output removed for readability>
Verifying the FPD Image Upgrade Progress
You can use the
show upgrade fpd progress
command to view a
“
snapshot
”
of the upgrade progress while
an FPD image upgrade is taking place. The following example shows the type of information this command
displays:
Router#
show upgrade fpd progress
FPD Image Upgrade Progress Table:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Everest 16.5
OL-14127-17
425
Upgrading Field-Programmable Devices
Displaying Information About the Default FPD Image Package