manualshive.com logo in svg

Cisco ASA 5508-X, Руководство по настройке, Страница: 82 / 428

Поделиться
Скачать
Cisco ASA 5508-X Скачать руководство пользователя страница 82

 

5-22

Cisco ASA Series Firewall CLI Configuration Guide

 

Chapter 5      Identity Firewall

  History for the Identity Firewall

This command shows the status of the AD Agent and the domains.

•

show user-identity ad-agent statistics

 

This command shows the statistics for the AD Agent.

•

show user-identity memory

This command shows the memory usage of various modules in the Identity Firewall. 

•

show user-identity user all list

This command shows information about all users contained in the IP-user mapping database used 
by the Identity Firewall.

•

show user-identity user active user

 

domain

\

user-name

 

list detail

This command shows additional information about an active user.

•

show user-identity group

This command shows the list of user groups configured for the Identity Firewall.

History for the Identity Firewall

\

Table 5-1

History for the Identity Firewall

Feature Name

Releases

Description

Identity Firewall

8.4(2)

The Identity Firewall feature was introduced.

We introduced or modified the following commands: 

user-identity enable, user-identity default-domain, 
user-identity domain, user-identity logout-probe, 
user-identity inactive-user-timer, user-identity 
poll-import-user-group-timer, user-identity action 
netbios-response-fail, user-identity user-not-found, 
user-identity action ad-agent-down, user-identity action 
mac-address-mismatch, user-identity action 
domain-controller-down, user-identity ad-agent 
active-user-database, user-identity ad-agent hello-timer, 
user-identity ad-agent aaa-server, user-identity update 
import-user

, 

user-identity static user

, 

dns 

domain-lookup

, 

dns poll-timer

, 

dns expire-entry-timer

, 

object-group user, show user-identity

, 

show dns, clear 

configure user-identity

, 

clear dns, debug user-identity

.

Содержание ASA 5508-X













































































































































































































































































































































































































































Отзывы:

Нет отзывов