2-24
Cisco Aironet 1530 Series Outdoor Access Point Hardware Installation Guide
OL-30864-01
Chapter 2 Installing the Access Point
Mounting the Access Point
Step 1
Mount the pivot bracket to a wall or a pole as shown in the previous procedures.
Step 2
Using four M6 x 12 mm bolts mount the horizontal adapter plate to the bracket mount plate.
Do not mount the pivot bracket mounting plate directly to the access point.
Step 3
Using the remaining four M6 x 12 mm bolts, mount the other side of the horizontal mounting plate to
the AP. See
for the exploded view.
Step 4
Using a 10 mm wrench or socket, tighten all M6 bolts to 40 lbf-in (4.5 Nm).
Step 5
Position the access point as needed and tighten the mount kit bolts using a 13 mm wrench or socket.
Drill bit for wall anchors
No
Electric drill and standard screwdriver
No
#6 AWG ground wire
No
Shielded outdoor-rated Ethernet (CAT5e or better) cable
No
Grounding block
No
Grounding rod
No
13-mm box-end wrench or socket set
No
10-mm box-end wrench
No
Materials Required
In Kit
