3-11
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
Accessing Network Configuration Settings
Assigning a Static IP Address
Note
You can only manually assign an IP address if DHCP is disabled.
The IP address is the unique logical address identifying each host computer, or
node, on a TCP/IP network. An IP address is a 32-bit number expressed as four
decimal numbers from 0 to 255 separated by periods.
Each IP address has two parts:
•
Network ID—identifies all hosts that are on the same physical network.
•
Host ID—identifies a specific host on a network.
To manually configure an IP address, follow these steps:
Procedure
Step 1
Press the
Up
or
Down
scroll button to select IP address.
The current IP address is displayed.
Step 2
Use the
<
softkey to delete the current IP address.
Step 3
Use the dialing pad to enter a new IP address.
Use the
.
softkey to enter periods (.) and the
<
softkey to correct any mistakes.
Step 4
Press the
Validate
softkey to check the IP address, mask and router. Press the
Save
softkey to save your changes.
Assigning a Subnet Mask
Note
You can only manually assign a subnet mask if DHCP is disabled.
The subnet mask is used to partition the IP address into a network and a host
identifier. The subnet mask is used to mask a portion of the IP address so that
TCP/IP can distinguish the network ID from the host ID.
Содержание 7936 - IP Conference Station VoIP Phone
Страница 8: ...Contents viii Cisco Unified IP Conference Station 7936 Administration Guide OL 10751 01 ...
Страница 23: ...xxiii Cisco Unified IP Conference Station 7936 Administration Guide OL 10751 01 Preface Document Conventions ...
Страница 24: ...Preface Document Conventions xxiv Cisco Unified IP Conference Station 7936 Administration Guide OL 10751 01 ...
Страница 120: ...Appendix B Translated Safety Warnings B 2 Cisco Unified IP Conference Station 7936 Administration Guide OL 10751 01 ...