Cisco 7936 - IP Conference Station VoIP Phone, Руководство администратора

Страница: 38 / 124

Chapter 2 Setting Up the Cisco Unified IP Conference Station 7936
Preparing to Install
2-6
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Step 6
Install the station by following the instructions in the Installing the
Cisco Unified IP Conference Station 7936, page 2-7 .
Assigning Static IP Addresses
If you do not use DHCP in your network, you must manually configure static IP
addresses for each station.
To assign a static address to the Cisco Unified IP Conference Station, follow these
steps. For additional information refer to the Cisco Unified CallManager
documentation or online help.
Procedure
Step 1 Start Cisco Unified CallManager Administration.
Step 2 Add a station to Cisco Unified CallManager by selecting Device > Add a New
Device .
The Add a New Device page displays.
Step 3
Choose Phone from the Device Type drop-down list box, and click Next .
The Add a New Phone page displays.
Step 4
Choose the Cisco 7936 phone type and click Next .
The Phone Configuration page displays.
Step 5
Enter the required fields.
Step 6
Install the Cisco Unified IP Conference Station by following the instructions in
the
Installing the Cisco Unified IP Conference Station 7936, page 2-7 .
Step 7
Configure the IP settings by following the instructions in the “Configuring IP
Settings” section on page 3-10 .
Step 8 Configure the TFTP server by following the instructions in the “Configuring
Alternate TFTP Options” section on page 3-15 .