3-74
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-14
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
24-Port Channelized T1/E1 ATM CEoP SPA Overview
•
24-Port Channelized T1/E1 ATM CEoP SPA Patch Panel
24-Port Channelized T1/E1 ATM CEoP SPA LEDs
The 24-Port Channelized T1/E1 ATM CEoP SPA has two types of LEDS, as shown in this figure:
Figure 3-54
24-Port Channelized T1/E1 ATM CEoP SPA Faceplate
The 24-Port Channelized T1/E1 ATM CEoP SPA LEDs are described in the following table.
24-Port Channelized T1/E1 ATM CEoP SPA Interface Specifications
The physical layer interface for the 24-Port Channelized T1/E1 ATM CEoP SPA is a customer-installed
high-density connector. The high-density connector has thumbscrews which should be screwed into the
SPA when the cable is installed.
24-Port Channelized T1/E1 ATM CEoP SPA Cables and Connectors
The 24-Port Channelized T1/E1 ATM CEoP SPA requires a Cisco cable (part number CABLE-24T1E1J1),
which is shown in the following figure.
1
A/C (Alarm/Carrier) LED
2
STATUS LED
4
When hot s
wapping this
fan tray,
removal an
d replacem
ent must
be done in
under two m
inutes or
system shu
tdown will o
ccur.
CAUTION
Table 3-45
24-Port Channelized T1/E1 ATM CEoP SPA LEDs
LED Label
Color
State
Meaning
STATUS
Off
Off
SPA power is off.
Amber
On
SPA power is on and good, and SPA is being configured.
Green
On
SPA is ready and operational.
A/C
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software.
Amber
On
Port is enabled by software, and there is at least one alarm.