Cisco 700 series, Руководство по установке

Страница: 72 / 118

ISDN BRI Cause Values
Cisco 700 Series Router Installation Guide 5-10
81 0051 Invalid call
reference value The remote equipment received a call with a call
reference that is not currently in use on the
user-network interface.
82 0052 Identified channel
does not exist The receiving equipment is requested to use a
channel that is not activated on the interface for
calls.
83 0053 A suspended call
exists but this call
identity does not The network received a call resume request. The
call resume request contained a Call Identify
information element that indicates that the call
identity is being used for a suspended call.
84 0054 Call identity in use The network received a call resume request. The
call resume request contained a Call Identify
information element that indicates that it is in use
for a suspended call.
85 0055 No call suspended The network received a call resume request when
there was not a suspended call pending. This
might be a transient error that will be resolved by
successive call retries.
86 0056 Call having
requested call
identity has been
cleared The network received a call resume request. The
call resume request contained a Call Identity
information element, which once indicated a
suspended call. However, the suspended call was
cleared either by timeout or by the remote user.
88 0058 Incompatible
destination Indicates that an attempt was made to connect to
non-ISDN equipment, for example, to an analog
line.
91 005B Invalid transit
network specified The ISDN exchange was asked to route the call
through an unrecognized intermediate network.
95 005F Invalid message,
unspecified An invalid message was received, and no standard
cause applies. This is usually due to a D-channel
error. If this error occurs systematically, report it
to your ISDN service provider.
Table 5-2 ISDN BRI Cause Values and Cause Messages (continued)
Cause
Value
1
Hex
Value
2
Cause Message Definition