Cisco 6823 Скачать руководство пользователя страница 149

Страница: 149 / 194

Description

Contents

Field

Identifies the firmware update (FWU) state:

• Off—Identifies that the sw version field is set

to 0 in the

Firmware Update

page.

• Initializing—Identifies that the update process

is starting.

• X%—Identifies the progress of the update, where

X is the amount of progress (0–100)

• Verifying X%—Identifies that the firmware

verification is in progress before it is used.

• Waiting for charger—Identifies that the firmware

update is complete and the handset needs to be
put into the charger to install the new firmware.

• Conn.term.wait—Identifies that the repeater

firmware update is complete and the repeater
reset is in progress.

• Complete—Identifies that the firmware update

is complete.

• Error—Identifies that the update was not

successful. Possible reasons included:

• File can't be found.

• File isn't valid.

This field is read-only

FWU Progress

Identifies the index of the configured SIP extension.

This field is read-only

VoIP Idx

Identifies the telephone extension assigned to the
handset.

(Admin view only) This field is a link to further
information about the handset in the

Extension

page.

Extension

Identifies the name assigned to the handset.

This field is read-only

Display Name

Identifies the Server IP Address or URL.

This field is read-only

Server

Identifies the server alias, if configured.

This field is read-only

Server Alias

Identifies the SIP registration state and the base station
that the handset is registered to. If the field is empty,
the handset isn't SIP-registered.

This field is read-only

State

Terminal Web Page Fields for Firmware Release V450 and V460

These are the fields displayed on the

Terminal

web page of the base station. You click on the IPEI number

of the handset in the

Extensions

page to see this screen.

Cisco IP DECT 6800 Series Administration Guide

141

Monitoring

Terminal Web Page Fields for Firmware Release V450 and V460

Содержание 6823



































































































































































































Результаты поиска

Содержание 6823

Отзывы:

Бренды по названию

Популярные бренды

Cisco 6823, Руководство администратора

Результаты поиска

Содержание 6823

Отзывы:

Бренды по названию

Популярные бренды