Program Mode,
Continued
Testing phase
The table below indicates the functions you can perform when you are in the Test
phase.
Secondary
Menu Item
Function
Test
This phase allows you to test the following characteristics of the
handheld controller.
Test RAM
The
YES/NO
option tests the
RAM
which is a small part of U113.
Note
: The result is indicated by
PASS/FAIL.
Test ROM
The
YES/NO
option executes a check
test on the
EPROM (U108).
Note
: The result is indicated by
PASS/FAIL.
Test EEPROM
The
YES/NO
option erases
and rewrites
each word on the EEPROM (U108).
Note
: The result is indicated by
PASS/FAIL.
Compliance criteria
The handheld controller may display unrecognizable characters due to an
electrostatic discharge (ESD) event, especially a discharge on the top part where the
interface cable is connected. The user should disconnect and reinsert the interface
cable from the equipment that is being accessed. This resets the handheld controller
so that it may resume its function.
Cisco Systems, Inc.
5030 Sugarloaf Parkway, Box 465447
Lawrenceville, GA 30042
678 277-1120
800 722-2009
www.cisco.com
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates
in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:
www.cisco.com/go/trademarks .
Third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any
other company. (1110R)
Product and service availability are subject to change without notice.
© 2008, 2012 Cisco and/or its affiliates. All rights reserved.
August 2012 Printed in USA
Part Number 573109 Rev C
