Cisco 5510 - ASA SSL / IPsec VPN Edition, Руководство по началу работы

Страница: 197 / 208

14-15
Cisco ASA 5500 Series Getting Started Guide
78-19186-01
Chapter 14 Configuring the CSC SSM
Scenario: Security Appliance with CSC SSM Deployed for Content Security
Step 13
Choose the interface from the drop-down list. Available options are global (all
interfaces), inside, management, and ssm management.
Step 14
Choose the source of network traffic from the IPv4 Network Objects list, and click
OK .
Step 15
To specify the destination of network traffic for the CSC to scan, click the ellipses
to display the Browse Destination dialog box.
Step 16
Choose the destination of network traffic from the IPv4 Network Objects list, and
click
OK .
Step 17
To specify the type of service for the CSC to scan, click the ellipses to display the
Browse Service dialog box.
Step 18
Choose the service(s) from the list, and click OK .
Step 19
Enter a description for the network traffic that you want the CSC to scan in the
field provided.
Step 20
To specify whether or not to allow the CSC to scan network traffic if it fails, do
the following:
•
To allow traffic through without being scanned, click Permit .
•
To prevent traffic from going through without being scanned, click Deny .
•
To save your settings, click OK . The added traffic details appear on the
Traffic Selection for CSC Scan screen.
•
To discard these settings and return to the Traffic Selection for CSC Scan
screen, click
Cancel . If you click Cancel , ASDM displays a dialog box to
confirm your decision.