Cisco 3DES, Руководство пользователя

Страница: 8 / 23

DES/3DES/AES VPN Encryption Module (AIM-VPN/EPII, AIM-VPN/HPII, AIM-VPN/BPII Family)
crypto engine accelerator
8
Cisco IOS Release 12.3(7)T
crypto engine accelerator
To enable a router’s onboard hardware accelerator for IPSec encryption, use the crypto engine
accelerator command in global configuration mode. To disable the use of the onboard hardware IPSec
accelerator, and thereby perform IPSec encryption/decryption in software, use the no form of this
command.
crypto engine accelerator
no crypto engine accelerator
Syntax Description This command has no arguments or keywords.
Defaults The hardware accelerator for IPSec encryption is enabled.
Command Modes Global configuration mode
Command History
Usage Guidelines This command is not normally needed for typical operations because the router’s onboard hardware
accelerator for IPSec encryption is enabled by default. The hardware accelerator should not be disabled
except on instruction from Cisco TAC personnel.
Examples The following example shows how to enable the router’s onboard hardware accelerator for IPSec
encryption. This operation is normally needed only after the accelerator has been disabled for testing or
debugging purposes.
Router(config)# no crypto engine accel
Warning! all current connections will be torn down.
Do you want to continue? [yes/no]:
Release Modification
12.1(3)T This command was introduced for the Cisco 1700 series router and other
Cisco routers that support hardware accelerators for IPSec encryption.
12.1(3)XL Support was added for the Cisco uBR905 cable access router.
12.2(2)XA Support was added for the Cisco uBR925 cable access router.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T and
implemented for the AIM-VPN/EPII & AIM-VPN/HPII on the following
platforms: Cisco 2691, Cisco 3660, Cisco 3725, and Cisco 3745.
12.2(15)ZJ This command was implemented for the AIM-VPN/BPII on the following
platforms: Cisco 2610XM, Cisco 2611XM, Cisco 2620XM,
Cisco 2621XM, Cisco 2650XM, and Cisco 2651XM.
12.3(4)T This command was integrated into Cisco IOS Release 12.3(4)T.