Cisco 3DES, Руководство пользователя

Страница: 12 / 23

DES/3DES/AES VPN Encryption Module (AIM-VPN/EPII, AIM-VPN/HPII, AIM-VPN/BPII Family)
show crypto engine accelerator statistic
12
Cisco IOS Release 12.3(7)T
show crypto engine accelerator statistic
To display the statistics and error counters for a router’s onboard hardware accelerator for IPSec
encryption, use the
show crypto engine accelerator statistic command in privileged EXEC mode.
show crypto engine accelerator statistic
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC
Command History
Examples The following example shows typical output of the current statistics and error counters for the router’s
hardware accelerator:
Router# show crypto engine accelerator statistics
Virtual Private Network (VPN) Module in slot :0
Statistics for Hardware VPN Module since the last clear
of counters 1379 seconds ago
167874 packets in 167874 packets out
201596210 bytes in 201596059 bytes out
121 paks/sec in 121 paks/sec out
1169 Kbits/sec in 1169 Kbits/sec out
0 packets decrypted 0 packets encrypted
0 bytes before decrypt 0 bytes encrypted
0 bytes decrypted 0 bytes after encrypt
0 packets decompressed 0 packets compressed
0 bytes before decomp 0 bytes before comp
0 bytes after decomp 0 bytes after comp
0 packets bypass decompr 0 packets bypass compres
0 bytes bypass decompres 0 bytes bypass compressi
0 packets not decompress 0 packets not compressed
0 bytes not decompressed 0 bytes not compressed
1.0:1 compression ratio 1.0:1 overall
20 commands out 20 commands acknowledged
Last 5 minutes:
Release Modification
12.1(1)XC This command was introduced for the Cisco 1700 series router and other
Cisco routers that support hardware accelerators for IPSec encryption.
12.1(3)XL This command was introduced for the Cisco uBR905 cable access router.
12.2(2)XA Support was added for the Cisco uBR925 cable access router.
12.2(13)T This command was integrated into Cisco IOS Release 12.2(13)T and
implemented for the AIM-VPN/EPII & AIM-VPN/HPII on the following
platforms: Cisco 2691, Cisco 3660, Cisco 3725, and Cisco 3745.
12.2(15)ZJ This command was implemented for the AIM-VPN/BPII on the following
platforms: Cisco 2610XM, Cisco 2611XM, Cisco 2620XM,
Cisco 2621XM, Cisco 2650XM, and Cisco 2651XM.
12.3(4)T This command was integrated into Cisco IOS Release 12.3(4)T.