DES/3DES/AES VPN Encryption Module (AIM-VPN/EPII, AIM-VPN/HPII, AIM-VPN/BPII Family)
show diag
21
Cisco IOS Release 12.3(7)T
show diag
To display hardware information for a router, use the
show diag
command in privileged EXEC mode.
show diag
[
slot
]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
This command displays information for the electronically erasable programmable read-only memory
(EEPROM), the motherboard, and the WAN interface cards (WICs), voice interface cards (VICs), and,
advanced integration modules (AIMs). Use this command to determine the type of port adapter installed
on a Versatile Interface Processor (VIP2) in your router.
Examples
The following example show how to obtain hardware information about an installed AIM-VPN.
Router#
show diag 0
Encryption AIM 1:
Hardware Revision :1.0
Top Assy. Part Number :800-03700-01
Board Revision :A0
Deviation Number :0-0
Fab Version :02
PCB Serial Number :JAB9801ABCD
RMA Test History :00
RMA Number :0-0-0-0
RMA History :00
EEPROM format version 4
slot
(Optional) Slot number of the interface.
Release
Modification
11.1 CA
This command was introduced.
11.2 P
This command was modified to update the example for PA-12E/2FE port
adapter, PA-E3 port adapter, and PA-T3 port adapter.
11.3 XA
This command was made available for Cisco IOS Release 11.3 XA.
12.0(5)XQ
This command was enhanced and made available for the Cisco 1750 router.
12.0(7)T
This command was modified to add the example for the Cisco 1750 router.
12.2(13)T
This command was integrated into Cisco IOS Release 12.2(13)T and
implemented for the AIM-VPN/EPII & AIM-VPN/HPII on the following
platforms: Cisco 2691, Cisco 3660, Cisco 3725, and Cisco 3745.
12.2(15)ZJ
This command was implemented for the AIM-VPN/BPII on the following
platforms: Cisco 2610XM, Cisco 2611XM, Cisco 2620XM,
Cisco 2621XM, Cisco 2650XM, and Cisco 2651XM.
12.3(4)T
This command was integrated into Cisco IOS Release 12.3(4)T.
