2-14
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 PRI Gateway and 3545 Serial Gateway Releases 5.6 and 5.7
OL-17011-01
Chapter 2 Installing the Cisco Unified Videoconferencing 3545 Gateway
How to Perform the Initial Gateway Configuration
Step 6
Press
Enter
.
The network configuration Main menu appears.
Step 7
At the Network Configuration menu, do one of the following:
•
Enter the letter for the set of parameters that you want to configure.
•
Enter
Q
to save your changes and allow the device to complete the boot process.
Changing the Configuration Tool Login Password
You can use the terminal emulator to change the default password of the default login user before others
can use the gateway interface.
Procedure
Step 1
Start a terminal emulator session for the gateway.
Step 2
Press the
RST
button on the front panel of the gateway.
After 60 seconds, a new terminal emulator session begins on the computer monitor.
After the second VxWorks banner scrolls across the screen, the following message appears: “Press any
Key to start the configuration.”
Step 3
Press any key and then press
Enter
.
Step 4
At the prompt, enter
P
and press
Enter
to select “change the configuration software password.”
Step 5
Type the user login name for which you want to change the password and press
Enter
.
The default user name is admin. This is the user name that allows you to access the gateway interface.
Step 6
Type the password you want the user to use to log in to the gateway interface and press
Enter
.
There is no default password.
Step 7
The network configuration
Main
menu re-appears.
Step 8
Enter
Q
and press
Enter
to exit.
Upgrading Gateway Software
Software upgrades for the gateway include the software components that are upgraded for the new
version and a utility to upload the software to the unit.
Procedure
Step 1
Download the upgrade software to a host that can access the gateway.
Step 2
Unzip the upgrade file.
Step 3
Double click the
upgrade.exe
file.
Step 4
In the
Target IP
field, type the IP address of the gateway for which you want to upload the software.
Step 5
In the
User Name
field, type the software user name.