2-63
Cisco Catalyst Switch Module 3110 and 3012 for IBM BladeCenter System Message Guide
OL-12191-01
Chapter 2 Message and Recovery Procedures
PM Messages
Error Message
PM-2-NOMEM: Not enough memory available for [chars].
Explanation
The port manager subsystem could not obtain the memory it needed to initialize the
specified operation. [chars] is the port manager operation.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the
show
tech-support
user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Error Message
PM-2-VLAN_ADD: Failed to add VLAN [dec] - [chars].
Explanation
The software failed to add the VLAN to the VLAN Trunking Protocol (VTP) database.
[dec] is the VLAN ID, and [chars] specifies the reason for the failure.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the
show
tech-support
user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
Error Message
PM-3-INTERNALERROR: Port Manager Internal Software Error ([chars]:
[chars]: [dec]: [chars]).
Explanation
An internal software error occurred in the port manager. The parameters identify the
problem for technical support. The first [chars] is the error message, and the second [chars] is the
filename. [dec] is the line number, and the last [chars] is the function name.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, contact IBM technical support and
provide the representative with the gathered information. For more information about the online
tools and about contacting IBM, see the
“Error Message Traceback Reports” section on page 1-6
Error Message
PM-4-BAD_APP_ID: an invalid application id ([dec]) was detected.
Explanation
The port manager detected an invalid request. [dec] is the application ID.
Recommended Action
Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the
show
tech-support
user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, contact
IBM technical support and provide the representative with the gathered information. For more
information about the online tools and about contacting IBM, see the
