4-10
VPN 3000 Series Concentrator Getting Started
78-15733-03
Chapter 4 Using the Command-Line Interface for Quick Configuration
Configuring Authentication
Step 5
If you specified per-user address assignment, the system prompts you to enter the IP address for this user.
This is the IP address assigned to this user as a client.
> User IP Address
Quick -> [ 0.0.0.0 ]
At the cursor, enter the user IP address in dotted decimal notation; for example, 10.10.1.35.
Step 6
If you specified per-user address assignment, the system prompts you to enter the subnet mask for this
user. This is the subnet mask assigned to this user as a client.
> User Subnet Mask
Quick -> [ 0.0.0.0 ]
At the cursor, enter the user subnet mask in dotted decimal notation; for example, 255.255.0.0.
Step 7
The system redisplays the user database with the new user added. You can add more users, delete users,
or continue with quick configuration.
Quick -> [ 0.0.0.0 ] 255.255.0.0
Current Users
-------------------------------------------------------------------------
| 1. simonz | |
-------------------------------------------------------------------------
1) Add a User
2) Delete a User
3) Continue
Quick -> _
At the cursor, enter the menu number for your selection; for example,
1
. To add more users, repeat Step 1
through Step 6 in this section. To delete a user (2), see the next step. To continue (3), skip to the
“Configuring the IPSec Group” section on page 4-14
or the
“Changing the Admin Password” section on
page 4-17
.
Step 8
If you choose to delete a user from the internal database, the system prompts you to enter the name of
the user to delete.
> User to Delete
Quick -> _
At the cursor, enter the name of the existing user you want to delete; for example, simonz. You must
enter the name exactly as listed in the table. After deleting the user, the system redisplays the user
database as in the previous step, but without the deleted user.
