22
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
OL-5792-04
Installing and Removing AIMs
Step 7
Check that the AIM is installed correctly on the system board. See
Figure 21
.
Figure 21
Correctly Installed AIM in the Cisco 2801 Router
Step 8
If you are finished installing modules, install the cover on the router. See the
“Installing the Chassis
Cover” section on page 56
.
Step 9
Apply the AIM label to the outside of the chassis as described in the
“Applying the AIM Label” section
on page 31
.
Installing Most AIMs in a Cisco 2811, Cisco 2821, or Cisco 2851 Router
Cisco 2811, Cisco 2821, and Cisco 2851 routers have two AIM connectors—AIM slot 0 and AIM slot 1.
You can install a virtual private network (VPN) encryption AIM or a voice-mail AIM in either slot, but
not in both slots. You can install voice and data compression AIMs and ATM AIMs in both slots.
Note
If you are installing an AIM2-CUE-K9 or AIM2-APPRE-104-K9, see the
“Installing AIM2-CUE-K9 or
AIM2-APPRE-104-K9 in a Cisco 2811, Cisco 2821, or Cisco 2851 Router” section on page 26
.
Accessory Kit to Use
To install most AIM modules in Cisco 2811, Cisco 2821, or Cisco 2851 routers, use accessory kit number
69-0926-01.
Installation Procedure
To install an AIM in a Cisco 2811, Cisco 2821, or Cisco 2851 router, follow these steps.
Note
If the mounting hardware is already in place on the system board, or if you are replacing an existing AIM,
skip
Step 2
through
Step 3
.
58696
Содержание 2801 - Integrated Services Router
Страница 8: ...8 Cisco 2800 Series Hardware Documents Introduction and Warnings OL 5808 01 Safety Warnings ...
Страница 102: ...14 Cable Connection Procedures for Cisco 2800 Series Routers OL 5787 02 Connecting to a Console Terminal or Modem ...
Страница 200: ...60 Installing and Upgrading Internal Modules in Cisco 2800 Series Routers OL 5792 04 Installing the Chassis Cover ...