manualshive.com logo in svg

Cisco 1800 Series, Руководство по установке оборудования, Страница: 14 / 82

Поделиться
Скачать
Cisco 1800 Series Скачать руководство пользователя страница 14

 

xiv

Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide

OL-6425-03

Preface

Related Documentation

Related Documentation

The Cisco IOS software that runs your Cisco 1800 series fixed-configuration router provides extensive 
features and functionality. For information that is beyond the scope of this document, or for additional 
information, use the resources listed in 

Table 2

.

Timesaver

Make sure that you have access to the documents listed in 

Table 2

. Some of these documents are 

available in print, and all are available on the World Wide Web. If you need to order printed documents, 
see the 

“Obtaining Documentation and Submitting a Service Request” section on page xvi

.

Cisco One-Year Limited Hardware Warranty Terms

The following are special terms applicable to your hardware warranty. Your formal Warranty Statement, 
including the warranty applicable to Cisco software, appears in the 

Cisco Information Packet

 that 

accompanies your Cisco product.

Duration of Hardware Warranty

One (1) Year

Replacement, Repair, or Refund Policy for Hardware 

Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten 
(10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery 
times can vary, depending on the customer location.

Table 2

Related and Referenced Documents 

Cisco Product

Document Title

Cisco 1800 series 
fixed-configuration routers

Cisco 1811 and Cisco 1812 Integrated Services Router Cabling and 
Installation

Cisco 1801, Cisco 1802, and Cisco 1803 Integrated Services Router 
Cabling and Installation

Cisco 1800 Series Integrated Services Router (Fixed) Software 
Configuration Guide

Regulatory Compliance and Safety Information for Cisco 1800 
Integrated Services Routers (Fixed)

Cisco Modular Access Router Cable Specifications

Cisco access router 
wireless LAN 
documentation

Cisco Access Router Wireless Configuration Guide

Cisco access router antenna documentation

Declarations of Conformity and Regulatory Information for Cisco Access 
Products with 802.11a/b/g and 802.11b/g Radios

Network management 
system

Network management software documentation

Cisco IOS software

Cisco IOS software documentation

, all releases. See the documentation 

for the Cisco IOS software release installed on your router.

Содержание 1800 Series



















































































Отзывы:

Нет отзывов