Cisco 1760 - VPN Bundle Router, Руководство по установке оборудования

Страница: 85 / 112

C-3
Cisco 1760 Modular Access Router Hardware Installation Guide
78-13342-03
Appendix C Installing and Upgrading Memory and Packet Voice Data Modules
Opening the Chassis
Opening the Chassis
Follow these steps to open the chassis:
Step 1
Make sure that the router is turned off and is disconnected from the power supply.
Step 2
Use a flat-head screwdriver to remove the screws that hold the top and bottom of
the chassis together, as shown in
Figure C-1 .
Note
Some Cisco 1760 routers have five chassis screws in the rear assembly,
but most models have three screws in the rear assembly.
Figure C-1 Removing the Cisco 1760 Chassis Screws
Step 3
Gently slide the top cover of the router toward you, as shown in Figure C-2 .
Figure C-2 Removing the Top Cover of the Router
100-240V~
1.5 MAX/1.5A MAX
50-60 Hz
60956
Chassis
screw
100-240V
~ 1.5 M
AX/1.5A
MAX
50-60 H
z
Pull the top cover
off in this direction.
60957