Contents
xxi
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
MLPoE at PTA
22-25
ATM Overhead Accounting
22-26
Prerequisites of MLPoE at PTA
22-26
Restrictions of MLPoE at PTA
22-26
Memory and Performance Impact of MLPoE at PTA
22-27
MLP-Based Link Fragmentation and Interleaving
22-27
Configuring MLP Bundles and Member Links
22-27
Creating an MLP Bundle Interface
22-28
Configuration Example for Creating an MLP Bundle Interface
22-29
Enabling MLP on a Virtual Template
22-30
Configuration Example for Enabling MLP on a Virtual Template
22-31
Adding a Serial Member Link to an MLP Bundle
22-31
Adding an ATM Member Link to an MLP Bundle
22-32
Configuration Example for Adding ATM Links to an MLP Bundle
22-34
Moving a Member Link to a Different MLP Bundle
22-35
Removing a Member Link from an MLP Bundle
22-36
Changing the Default Endpoint Discriminator
22-37
Configuration Example for Changing the Endpoint Discriminator
22-37
Configuration Examples for Configuring MLP
22-38
Configuration Example for Configuring MLP over Serial Interfaces
22-38
Configuration Example for Configuring Single-VC MLP over ATM
22-38
Configuration Example for Configuring Multi-VC MLP over ATM
22-39
Configuration Example for MLP on LNS
22-39
Configuration Example for MLPoE LAC Switching
22-41
Configuration Examples of MLPoE at PTA
22-41
Configuring MLPoE over IEEE 802.1Q VLANs
22-42
Configuring MLPoE through RADIUS
22-42
Verifying and Monitoring MLP Connections
22-43
Bundle Counters and Link Counters
22-44
Verification Examples for MLP Connections
22-44
Verification Example for the show interfaces multilink Command
22-44
Verification Example for the show ppp multilink Command
22-45
Verification Example for the show interfaces multilink stat Command
22-46
Related Documentation
22-46
C H A P T E R
23
Configuring Gigabit EtherChannel Features
23-1
Feature History for Gigabit EtherChannel
23-2
Prerequisites for Gigabit EtherChannel Configuration
23-3
Restrictions for Gigabit EtherChannel Configuration
23-3
