xxxii
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
About This Guide
Document Conventions
This guide also includes a Glossary and an Index.
Document Conventions
This guide uses the following conventions:
•
Bold
is used for commands, keywords, and buttons.
•
Italics
are used for command input for which you supply values.
•
Screen
font is used for examples of information that are displayed on the screen.
•
Bold screen
font is used for examples of information that you enter.
•
Vertical bars ( | ) indicate separate alternative, mutually exclusive elements.
•
Square brackets ( [ ] ) indicate optional elements.
•
Braces ( {} ) indicate a required choice.
•
Braces within square brackets ( [{}] ) indicate a required choice within an optional element.
Note
Means
reader take note
. Notes contain helpful suggestions or references to material not covered in the
guide.
Timesaver
Means the
described action saves time
. You can save time by performing the action described in the
paragraph.
Caution
Means
reader be careful
. In this situation, you might do something that could result in equipment
damage or loss of data.
Warning
Means
danger
. You are in a situation that could cause bodily injury. Before you work on any
equipment, you must be aware of the hazards involved with electrical circuitry and familiar with
standard practices for preventing accidents. To see translated versions of warnings, refer to the
Regulatory Compliance and Safety Information
document that accompanied the device.
Chapter 23
Protecting the Router from DoS Attacks
Describes how to protect against denial of service (DoS)
attacks.
Chapter 24
IP Tunneling
Describes the Generic Routing Encapsulation Tunnel IP Source
and Destination VRF Membership feature.
Appendix A
RADIUS Attributes
Lists RADIUS attributes that the Cisco 10000 series router
supports.
Chapter
Title
Description
