CIS WAP XL, Руководство пользователя

Страница: 9 / 29

9
Quick Setup
1. Connect the Ethernet cable from your router to Ether1 on the access point. If your router supports
PoE, turn it on to power the device. If not, use the included PoE injector.
2. (Optional) Connect an additional access point or device to Ether2. The port is bridged, meaning it
acts like a switch port. If the connected device supports passive PoE, it will be passed through to
it.
3. The access point will receive an IP address via DHCP. Access the DHCP leases on your router page
to find the IP address of the access point, then enter the IP address in a web browser to view the
configuration (next page).