VCC-SXCXP3M Rev. 905-0049-00
©2017 CIS Corporation. All rights reserved.
23
9.5 Index Mode
This is the mode to directly specify the Index number to apply by IndexSelectorModeIndexNumber.
Every time when a trigger is input, the Index parameter set specified by IndexSelectorModeIndexNumber is applied to
the camera.
・
Set TriggerSelectorAndActivation to the mode to be used out of FrameStartRisingEdge/ FrameStartFallingEdge/
FrameStartLevelHigh/ and FrameStartLevelLow.
(1)
Edge Control
・
Exposure time for each frame shall be controlled by the preset sequence parameter set.
(2)
Pulse Width Control
・
Trigger Pulse Width becomes exposure time for each frame. Exposure time of the parameter set is not referred.
※
As to the timing to issue IndexSelectorModeIndexNumber command, input a trigger pulse when ACK is responded
after IndexSelectorModeIndexNumber is issued, to make sure the specified parameter set is to be reflected to the
next frame.
Applying param
Index #0
Applying param
Index #1
Applying param
Index #2
Applying param
Index #3
Applying param
Index #8
#0
#1
#0
#1
#7
Index Selector
RegisterModeIndexNumber
Shutter
Gain
ROI
Param #0
Shutter
Gain
ROI
Param #1
Shutter
Gain
ROI
Param #2
Shutter
Gain
ROI
Param #3
Shutter
Gain
ROI
Param #7
Sequence Index
Parameter Index Number
Combination of each Index
and parameter set
