VCC-SXCXP3M Rev. 905-0049-00
©2017 CIS Corporation. All rights reserved.
18
8.10 Camera Timing Output
According to the settings of LineSource, the following signals can be output from the 6pins circular connector at camera rear.
Digital IO Control
LineSelector
Line1
LineMode
Output
LineSource
OFF
ExposureActive
FrameActive
LineActive
TriggerPacketActive
・
LineSource
ExposureActive
：
Exposure period of image sensor is to be shown as Hi Active.
FrameActive
：
The effective period of the frame is to be shown as Hi Active.
LineActive
：
The effective period of the line is to be shown as Hi Active.
TriggerPacketActive
：
Uplink trigger packet signals from the frame grabber board is to be decoded and output.
8.11 Device User ID
DeviceControl
DeviceUserID
[User Defined]
The user defined device name up to 16 characters can be set to the camera. Execute “UserSetSave” to save it to EEPROM in
the camera. Execute “UserSetDefault” if you wish to restore it to the factory setting.
※
This is the resister area for up to 16byte. English single byte characters shall be input.
