Cirrus Optimus Green Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 56

background image

Optimus sound level meter - instrument handbook

2

About this manual

• The instructions in this user manual refer to the operation of Cirrus Research plc
Optimus sound level meters with version 5.0 or higher of the firmware.

• The instruments described in this manual are the Optimus Yellow (CR:150 series),
Optimus Red (CR:160 series), Optimus Green (CR:170 series) and Optimus Purple
(CR:190 series).

• Some functions described in this manual are only available on Red or Green versions
of the Optimus sound level meter. Where functions are applicable to only some
instruments in the range, this will be clearly indicated in the text.

• In this manual, “Optimus” is used as a general reference for the range of Optimus
sound level meters and “calibrator” is used as a general reference for an acoustic
calibrator.

• This manual describes the recommended usage of the Optimus. Any warnings will be
indicated by the following symbol:

• The additional information required for testing in accordance with IEC 61672 is
provided as a supplementary document, Optimus Sound Level Meters Technical Data
Part B, which is available for download at:
www.cirrusresearch.co.uk/library/user-manuals/

• It is not possible to change the way that the instrument measures through the software
or firmware. Any legal metrology aspects of the instrument cannot be affected by any
changes made in the instrument.

• The Common Specifications section on page 33 defines which standards relate to the
different functions available in the instruments. Additional approvals and certifications
may apply to the instruments and these will be listed in the Appendices.

• More detailed explanations of the audio recording templates, tonal noise detection
and the repeat measurement timers are available to download from the Cirrus website
at www.cirrusresearch.co.uk/library/user-manuals/

«
1
2
3
4
...
»

Содержание Optimus Green Series

























































Отзывы:

Нет отзывов

Похожие инструкции для Optimus Green Series

Бренд: Oceanic Страницы: 68

Бренд: Oceanic Страницы: 24

Бренд: Tavool Страницы: 12

Бренд: Keithley Страницы: 31

Бренд: Keithley Страницы: 63

Бренд: Keithley Страницы: 18

Бренд: Keithley Страницы: 73

Бренд: GREISINGER Страницы: 20

Бренд: Omega Страницы: 100

Бренд: AKCP Страницы: 16

Бренд: Swann Страницы: 106

Бренд: Bitzer Страницы: 8

Бренд: RS PRO Страницы: 41

LaserDIMENSIONMASTER 3336

Бренд: Calculated Industries Страницы: 2

Бренд: dacell Страницы: 39

Бренд: Hanna Instruments Страницы: 52

Roast Alert/3 ET-8C

Бренд: Redi-Chek Страницы: 3

AquaShock 850046K

Бренд: Sper scientific Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды