Cirrus BladeM, Руководство по установке

Страница: 9 / 32

BladeM LED Display System
Installation Manual
Cirrus | 200 West Rd, Portsmouth, NH 03801 | 877 636 2331 | contact@cirrusled.com | cirrusled.com
9
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
3. Environmental considerations
4. Shipping & Receiving, product storage
The BladeM LED panels are fully encapsulated and water-proof. The M1 Pro Controller is housed in
a water-proofed aluminum enclosure.
The BladeM LED panels are rated for an ambient operating temperature range of -40~+70° Celsius (-40
~ +158° Fahrenheit) and are designed to withstand continuous direct sunlight. If the panels experience
an over-temperature condition, a signal will be sent to the controller to shut down the sign. Once the
sign has cooled, it will automatically re-start.
The M1 Pro Controller is rated for an ambient operating temperature range of -10~+60°C (14~ +140°F)
and should be protected from direct sunlight. Operation at colder temperatures is routinely and
regularly accomplished, though starting the screen from a powered off state at temperatures below
14°F may not be possible. A controller which is in a powered on state produces ambient heat which
can allow it to continuously run at temperatures as low as -30°F (-34°C).
All components and connections are sealed and water-tight for protection from the ingress of dust and
water, though no components should be subjected to immersion in water.
All deliveries shall be FOB Cirrus Systems (Seller), Portsmouth, NH. Methods and routes of
shipment, unless Seller specifies in writing otherwise, shall be accepted as chosen by Seller at
Seller’s sole discretion. Purchaser shall pay all costs of shipment. Delivery to the carrier shall
constitute delivery and passage of title to Purchaser, and risk of loss shall pass to Purchaser
concurrently with passage of title. Seller will use reasonable diligence to meet scheduled shipment
dates and times. Such dates and times are the best possible estimates, and not guarantees, of
when goods will be shipped. In no event shall Seller be liable for any losses or damages of any kind
due to delays in shipment, nor may Purchaser cancel its contract because of any such delay.
It is the responsibility of the Purchaser to check the Product for visible damage prior to accepting delivery
from the carrier. Any damage to the Product must be noted on the delivery slip with the carrier and
immediately reported to Cirrus. Photographic evidence of damages will be required. Cirrus may assist in
seeking remedy with the carrier for damaged goods but does not retain title and therefore is not legally
responsible for said damages.
Delivered product should be stored in a cool dry place, out of the way of foot/motorized traffic.
It is the installer’s responsibility to look over the product before installing to ensure there are no
missing parts and there is no visible damage to any parts of the display. If there is any damage,
Cirrus must be informed prior to install.