Cirrus BladeM Скачать руководство пользователя страница 8

Страница: 8 / 32

BladeM LED Display System

Installation Manual

Cirrus | 200 West Rd, Portsmouth, NH 03801 | 877 636 2331 | [email protected] | cirrusled.com

This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.

2. Safety/compliance information

High voltage

Contact with high voltage from AC mains may cause death or serious injury. Always

disconnect AC power to unit prior to servicing.

Cirrus LED components are UL Listed. File #E352796 and FCC Certified.

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own

expense.

Changes or modifications to this device that are not expressly

approved by Cirrus Systems, Inc. could void user’s authority to

operate this device.

Grounding

It is essential to earth-ground the sign before connecting controller. Connecting

signs that are not earth grounded may cause damage to the LED Display System

and in severe cases cause death or injury.

Other

Other safety messages appear throughout this manual where appropriate.

BLADE M LED DISPLAY SYSTEM

INSTALLATION MANUAL

cirrusled.com

Cirrus Systems Inc. | 200 West Rd, Portsmouth, NH 03801 • Phone: 1.877.636.2331 | [email protected]

THIS DOCUMENT IS CONFIDENTIAL & PROPRIETARY TO CIRRUS SYSTEMS FOR DISTRIBUTION TO DIRECT CUSTOMERS AND THEIR INSTALLERS ONLY.

FCC Information

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.
Changes or modifications to this device that are not expressly approved by Cirrus Systems,

Inc. could void user’s authority to operate this device.

FCC information

Содержание BladeM

































Результаты поиска

Содержание BladeM

Отзывы:

Похожие инструкции для BladeM

Бренды по названию

Популярные бренды

Cirrus BladeM, Руководство по установке

Результаты поиска

Содержание BladeM

Отзывы:

Похожие инструкции для BladeM

Бренды по названию

Популярные бренды