background image

Leakage  

If your steamer is leaking, try to locate the origin of the leakage. Is it coming from the 
mouthpiece or the water tank, perhaps? If the water is coming straight from the tank, ensure 
the little stopper/rubber plug has been properly attached. Also, please double-check so that the 
tank is correctly connected to the steamer. There should not be a space/gap between the water 
tank and the steamer. Is the leakage coming from somewhere else than the water tank? Don't 
hesitate to get in touch with our customer support for further assistance.  

  

Weird noise  

Is there sometimes a weird sound coming from your steamer? This is normal, and it's just the 
steamer working to heat the water inside the boiler.  

  

No steam 

If there's no steam coming out, there are a couple of things you can do for yourself to try to 
rule out what might be the problem. Start with the water tank. At first, you could check that the 
water tank contains enough water and fill up the water tank appropriately. Then you can try 
removing the water tank and then putting it back in place again. If the water tank's not 
attached correctly and there's a gap between the tank and the device, this may well be the 
problem. If there's still no steam and you have access to a spare water tank (from another 
steamer, maybe?), then please try another water tank to see if that's where the problem lies. 

Is something wrong with the power supply? Check the power plug connection and ensure that 
the socket functions the way it's supposed to. 

Did you wait long enough for the steamer to heat up? 
It takes about 25 seconds for the steamer to heat up and the orange/red light to go out and 
turn green. Do not push the steam button before you see the green light. 

Do I need to descale my steamer? Cirrus 2 has a coating that makes it resistant to limestone 
and minerals residues, so there is no need to descale it too often. Although, if the trouble 
remains and no steam comes, you could try to descale the steamer using vinegar. Please follow 
our guidelines how to proceed with this. Also, please remember that we recommend using 
distilled, deionized, filtered, or battery water in regions with hard water to prevent these kinds 
of issues. 

  

Содержание 3









Отзывы: