3.
Empty the storage container by tilting it upside down and remove the last fuzz by using
a finger or the little brush that comes with the product.
4.
Remove the metallic perforated mouthpiece by carefully lifting it. Please keep in mind
that the blades are razor-sharp.
5.
Use the brush to clean the blades and blow away the last fuzz with your mouth.
6.
Don’t forget to us
e the brush to clean the back of the shield and the perforated
mouthpiece. Threads and leftover lint can essentially slow down and compromise the
effectiveness of the Pilo No.2.
7.
Reassemble the parts. The two small dots should be in line with each other
–
you will
also hear a click sound when the parts connect correctly.
Pilo 1 Fabric shaver
My Pilo 1 stopped working
–
what to do?
Trouble with your Pilo? Don't worry; you can do a couple of things yourself to troubleshoot. If
the problem remains after checking these things, don't hesitate to contact our customer
support and we will help you further!
Cleaning
A widespread issue with the Pilo is when lint gets stuck under the razor blades. If the Pilo isn't
adequately cleaned, the leftover fuzz can prevent the device from working. You can solve this
by opening the Pilo Fabric Shaver using the following steps:
•
Unscrew the plastic shield ring from the device
•
Use the brush stick to remove fuzz
•
Remove the metallic perforated mouthpiece by unscrewing it carefully. Be careful; the
blades underneath are sharp
•
To clean out excessive fuzz around the rotor, use the end of the brush stick to remove
the blade unit and push it straight upward
•
Double check that there are no threads or leftover fuzz twirled around the rotor pin
•
Also, clean the actual blades. Use the brush and/or blow away the fuzz
If you want to learn more about how to clean your Pilo 1, here's a guide:
Charging
When the built-in battery is drained, the Pilo needs charging for at least 5 hours. Use the
included cord and plug it into the USB port on a computer, or use an adapter (the kind that
usually comes with a smartphone) in a power socket. Would you please let the Pilo charge for a
minimum of five hours between usage? A green diode lights up during charging, and it stays on
even when fully charged. Ensure that the green light is visible (if not, the Pilo or the cord may
be broken).
