CR:112A & CR:112AIS doseBadge User Manual
Page 36
Other Information
Other information may be displayed by the Reader unit during the measurement
review. These are covered below.
Shown when:
The Run Time and Leq are too low for the Reader unit to
accurately calculate an L
EX,8
value.
Shown when:
The value for the % Noise Dose is too large to be
calculated.
Shown when:
The value for the Estimated % Noise Dose is too large to
be calculated.
Shown when:
The doseBadge was not calibrated before the measurement
was started.
