CDB61880
12
DS450DB1
5. CS61880 CONFIGURATION SCREENS
5.1 Choose Parallel Port Settings
The opening screen shown before in
and
now in
is used for the following configu-
ration activities:
-
Select the Parallel Port mode of operation
-
Select the parallel port address
Click the appropriate radio button to choose the op-
erational modes you wish to use.
Important Notes:
1. If the mode of operation does not match the
mode switches on the evaluation board, an
error will occur.
2. If the parallel port address does not match
the address of the control parallel port,
access to the register bits will not be
permitted.
5.2 Access and Configure the Read / Write
Registers
You also use the opening screen to access the
tabbed configuration screens for the Read / Write
Registers.
5.2.1 Access Configuration Screens
Click on the
Read/ Write Registers
button on the
opening screen to start configuring these registers.
5.2.2 Select Register to Configure
When the next screen appears, select the desired
register screen by clicking on one of the TABs la-
beled
Loopback/Bits
Clk
,
LOS/AIS/DFM
,
XMIT
,
AWG,
or
GCR
at the top of the
Read/Write Register screen.
Figure 19. Opening Screen for Port and Address Selection Screen
Содержание CS61880
Страница 4: ...CDB61880 4 DS450DB1 1 CDB61880 EVALUATION BOARD LAYOUT Figure 1 CDB61880 Board Layout ...
Страница 21: ... Notes ...
Страница 22: ......