Cirrus Logic CRYSTAL LAN CS890 Скачать руководство пользователя | Manualshive

Страница: 61 / 80

background image

AN83REV1

61

CS8900 Technical Reference Manual

4.0 Device Drivers and
Setup/Installation Software

This chapter discusses the software
provided by Crystal for use with the
CS8900. That software includes a broad
family of device drivers, driver-related
data files, and utilities. A single-user,
evaluation copy of that software is in-
cluded with this Kit. The following driv-
ers are included in the Kit:

a) Novell ODI 4.x DOS (for use with

Netware clients)

b) Novell ODI 4.x OS/2 driver (for

use with Netware OS/2 clients)

c) Novell ODI 4.x Server driver

d) Microsoft NDIS 3.X driver (for use

with Windows 95, Windows NT, and
Windows for Workgroups)

e) Microsoft NDIS 2.X DOS driver

(for use with many NOSs including
Microsoft LAN MANAGER, IBM
LAN SERVER, Banyan Vines,
LANtastic, DEC Pathworks)

f) Microsoft NDIS 2.X driver for

OS/2

g) Boot PROM program (for ODI

and NDIS) allowing a diskless PC to
load a simple LAN driver from
PROM and then use the simple driver
to boot DOS from a server over the
network. Also known as RIPL
(Remote Initial Program Load).

h) Packet Driver V1.09 (for use with

TCP/IP protocol stacks, including
PC/TCP, SUN PC-NFS, Wollongong)

i) SCO UNIX driver and installation

script

Additionally Crystal provides two utility
programs:

a) DOS Setup and Installation Utility

b) EEPROM Programming Utility, for

use in OEM manufacturing environ-
ments.

4.1 Crystal’s Software Licensing
Procedures

The CS8900 developer’s kit contains a
single-user copy of object code which is
available only for internal testing and
evaluation purposes. This object code
may not be distributed without first
signing a LICENSE FOR DISTRIBU-
TION OF EXECUTABLE SOFTWARE,
which may be obtained by contacting
your sales representative. The LICENSE
FOR DISTRIBUTION OF EXECU-
TABLE SOFTWARE gives you unlim-
ited, royalty-free rights to distribute
Crystal-provided object code.

4.2 Contents of Floppy Disks
Included with this Kit

There are three floppy disks included
with the CS8900 Developer’s Kit.

Floppy #1, labeled Setup and Device
Driver Software, contains the DOS
Setup and Installation Utility (see sec-
tion 4.2) ,the EEPROM Programming
Utility (see section 3.2), and all of the
programs and data files needed for all

«
...
59
60
61
62
63
...
»

Содержание CRYSTAL LAN CS890

















































































Отзывы:

Нет отзывов

Похожие инструкции для CRYSTAL LAN CS890

FPBA-01 PROFIBUS DP

Бренд: ABB Страницы: 2

ControlMaster CM15

Бренд: ABB Страницы: 4

Бренд: Jetline Страницы: 58

COOPER POWER SERIES

Бренд: Eaton Страницы: 50

Бренд: Harmonic Drive Страницы: 25

Бренд: Nelson Страницы: 8

Бренд: Gardena Страницы: 14

Бренд: Gardena Страницы: 8

Бренд: Hach Страницы: 2

Бренд: Hach Страницы: 12

Бренд: Hach Страницы: 472

Бренд: Hach Страницы: 64

Бренд: V2 ELETTRONICA Страницы: 6

Бренд: Hach Страницы: 210

Бренд: LAS Страницы: 6

Бренд: National Instruments Страницы: 14

Бренд: National Instruments Страницы: 31

Бренд: National Instruments Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды