Circutor RGU-10 MT, Инструкция по эксплуатации

Страница: 21 / 42

21
Instruction Manual
RGU-10 MT
Table 9: Adjustment parameters�
Parameter Units
Contact status: Interlock relay
+ (contact 8-7 NO) / nothing (contact 8 - 7 NC)
+ (contact 8-9 NC) / nothing (contact 8 - 9 NO)
Working frequency
(1)
Hz
No. of peripheralss
(1)
-
Communication baudrate
(1)
Bauds
Parity
(1)
-
(1)
For the
RGU-10C MT
model only.
4�6�1�- DISPLAY SCREENS
To display all the parameters, the device uses 4 screens: 2 fixed and 2 floating.
To switch between them, short press the PROG key.

Fixed screens
These screens display the delay, the programmed nominal current, the current leakage current and the
total number of reclosings.
Once this type of screen is selected, to switch to another display, short press the PROG key.

Floating screens
They indicate the number of earth leakage and overcurrent reclosings. They time out after a certain
period to show the fixed screens again.
PROG PROG
PROG
PROG
Floating screens
Fixed screens
Figure 15:Display screens�