Page
29
A. Appendix: Installation and start up of the QNA-GSM/GPRS.
Configure the QNA-P/PV analyzer before inserting the new SIM card
N.B: The GSM line used must be capable of data transmission
First the SIM on the phone line to be used must be configured to enable
communication with the QNA-P/PV GSM/RS-232’s GSM modem,.
This action will always be required when a new SIM card is inserted in the
QNA GSM analyzer, regardless of whether it is the first installation or a replacement
SIM.
Proceed as follows:
1. With no SIM card inserted:
1)
Turn on the QNA analyzer.
2)
Connect to the QNA analyzer via the RS-232 serial port using a communication
cable.
3)
Use the PC software to add a QNA or, for a SIM change, modify the
configuration on the existing QNA analyzer.
4)
Access the “general parameter” option in the software field, and select the option
called “PIN change”.
The following screen will be then shown:
Содержание Q20711
Страница 14: ...Page 13 5 3 Connection drawing for the QNA P PV...
Страница 15: ...Page 14...
Страница 16: ...Page 15...
