Circutor Q20711, Руководство пользователя

Страница: 29 / 36

Page
28
10.- SAFETY CONSIDERATIONS
The user should take into account all installation instructions
indicated in the INSTALLATION & STARTUP and TECHNICAL
SPECIFICATIONS sections in this manual.
Note that when the instrument is switched on, the terminals may be
dangerous when touched and opening or removing parts may access
dangerous areas.
The analyzer has been designed and tested to meet IEC 348
standard and is factory-shipped in proper operating conditions.
11.- MAINTENANCE
The QNA-P/PV does not require any special maintenance. No adjustment,
maintenance or repair should be carried out while the instrument is open and
switched on. Qualified technicians must carry out these actions when they are
necessary.
Before any adjustment, replacement, maintenance or repair, the instrument
must be totally disconnected from any power supply source.
If any protection failure is suspected, the instrument must be immediately
placed out of service. The instrument’s design allows it to be quickly replaced in the
event of any breakdown.
The design of the analyzer allows it to be easily replaced in the event of
breakdown.
12.- TECHNICAL SERVICE
For any information on the instrument’s performance or in the event of
breakdown, please contact CIRCUTOR’s technical service.
CIRCUTOR S.A. - After-sales service
Vial Sant Jordi, s/n
08232 - Viladecavalls (BARCELONA - SPAIN)
Tel - + 34 93 745 29 00
fax - + 34 93 745 29 14
E-mail :
central@circutor.es