Circutor DHB-402, Инструкция по эксплуатации

Страница: 40 / 60

shown in
Figure 53�
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the services menu (
Figure 50
)
Range: 0.00 ... 23.59.
4�7�9�4� DISPLAYING THE UNIT OF MEASUREMENT
Screen used to light up the LED that indicates the units measured if the label is attached to the unit.
See section
“4.2.- DISPLAY”
The screen flashes between the symbol and the configured value. (
Figure 54
)
Figure 54:Unit of measurement display configuration screen�
To edit the parameter, press the button.
The parameters that can be displayed are:
Unit of measurement LED off.
Unit of measurement LED on.
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
The unit goes back to the screen shown in
Figure 54
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the services menu (
Figure 50
).
Default value: Unit of measurement LED switched off ( Off )
40
DHB-402 DHB-424
Instruction Manual