4.- OPERATION
4�1�- MEASURING PARAMETERS
The unit measures or calculates all the parameters in
Table 4:Measurement parameters
Parameter
Display range
Maximum display
range
Voltage
Range:
10 V
-10 ...10 V
-13 ...13 V
Range:
60 mV
0 ... 60 mV
-10 ... 63 mV
Current
-20...20 mA
-24...24 mA
Temperature: Type J thermocouple
- 100 ... 1200 ºC
- 200 ... 1200 ºC
Temperature: Type K thermocouple
- 100...1370 ºC
- 200 ... 1370 ºC
Temperature: Type N thermocouple
- 100 ... 1300 ºC
- 200 ... 1300 ºC
Temperature: Type E thermocouple
- 100 ... 1000 ºC
- 200 ... 1000 ºC
Temperature: Type R thermocouple
- 50 ... 1760 ºC
- 50 ... 1768 ºC
Temperature: Type S thermocouple
- 50 ... 1760 ºC
- 50 ... 1765 ºC
Temperature: Type PT100 RTD
- 200 ... 850 ºC
- 205 ... 855 ºC
Temperature: Type PT500 RTD
- 200 ... 850 ºC
- 205 ... 855 ºC
Temperature: Type PT1000 RTD
- 200 ... 850 ºC
- 205 ... 855 ºC
Resistance
Range: 400 Ω
0 ... 400 Ω
0 ... 410 Ω
Range: 4000 Ω
0 ... 4000 Ω
0 ... 4010 Ω
Current time
0.00 ... 23.59
0.00 ... 23.59
4�2�- DISPLAY
The display is divided into 2 areas:
Figure 6:
Measurement
data area
Unit of
measurement
area
Areas of the DHB-4xx display
Measurement
data area,
for viewing the value of the parameter measured or calculated by
the unit.
Unit of measurement area
, where you can see the unit for the parameter you are viewing.
To do so, select the label with the unit of measurement you wish to use and stick it in its space.
Then activate the corresponding LED (see section
“
4.7.9.4. DISPLAYING THE UNIT OF MEASURE-
) .
11
Instruction Manual
DHB-402 DHB-424
