Circutor DHB-302, Инструкция по эксплуатации

Страница: 29 / 70

To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button.
Once at the desired value, validate by pressing the button.
You can now select the position of the decimal point, which will be flashing.
To select the position of the decimal point, press the button.
Validate by pressing the button. The unit goes to unit configuration.
To select the unit, press the button repeatedly.
The unit selected is displayed in red.
Once at the desired unit, validate by pressing the
button.
The unit goes back to the screen shown in
figure 29
.
To move to the next parameter on the menu, press the button.
Range: -19999 M ... 99999 M.
Default value: 99999 M
4�6�2�9� eXITINg THe MeNU�
At the end of the menu the screen shown in
figure 30
appears.
Press the button to go back to the main screen of the display menu (
figure 21
).
figure 30:end of menu screen
29
Instruction Manual
DHB-302 DHB-324