Circutor DHB-302, Инструкция по эксплуатации

Страница: 19 / 70

Reactive energy
Consumed
Maximum demand for
active power
Average voltage
(10 minutes)
Average frequency
(10 seconds)
Current time
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
The unit goes back to the screen shown in
figure 13
�
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the parameters menu
(
figure 12
).
Default value: Active power (P).
4�6�1�2� SyNCHRONISATION
This configuration screen is used to select the type of synchronisation.
The screen flashes between the symbol and the configured value. (
figure 14
).
figure 14: Synchronisation screen�
To edit the parameter, press the button.
The options are:
Synchronisation with the voltage, the unit will measure all the parame-
ters.
Synchronisation with the current, the unit only measures the current and
the frequency.
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
19
Instruction Manual
DHB-302 DHB-324