Circutor CVM-C4 Series Скачать руководство пользователя страница 8

Страница: 8 / 70

CVM-C4

Instruction Manual

3 .- DEVICE INSTALLATION

3�1�- PRIOR RECOMMENDATIONS

In order to use the device safely, it is critical that individuals who handle it follow the

safety measures set out in the standards of the country where it is being used, using

the personal protective equipment necessary (rubber gloves, face protection and ap-

proved flame-resistant clothing) to prevent injuries due to electric shock or electric arc

as a consequence of exposure to current-carrying conductors and paying attention to

the various warnings indicated in this instruction manual.

The

CVM-C4

device must be installed by authorised and qualified staff.

The power supply plug must be disconnected and measurement systems switched off before handling,

altering the connections or replacing the device. It is dangerous to handle the device while it is pow-

ered.

It is critical to keep wires in perfect condition to avoid accidents, personal injury or damage to instal-

lations.

Limit the operation of the device to measuring the specified current or voltage values.

The manufacturer of the device is not responsible for any damage resulting from failure by the user

or installer to heed the warnings and/or recommendations set out in this manual, nor for damage

resulting from the use of non-original products or accessories or those made by other manufacturers.

Do not use the device to take measurements if you detect an anomaly or malfunction.

Disconnect the device from the mains and from the power supply (both the device and

its measuring system) before performing any maintenance work, repairs or handling

any of the connections of the device.

Contact the after-sales service if you detect that the device is not working properly.

Содержание CVM-C4 Series







































































Результаты поиска

Содержание CVM-C4 Series

Отзывы:

Похожие инструкции для CVM-C4 Series

Бренды по названию

Популярные бренды

Circutor CVM-C4 Series, Инструкция по эксплуатации

Результаты поиска

Содержание CVM-C4 Series

Отзывы:

Похожие инструкции для CVM-C4 Series

Бренды по названию

Популярные бренды