Circutor CIRWATT Series, Руководство по установке

Страница: 16 / 30

Page No.
15
4.4.1.4.-
Screen L4 (INFORMATION)
This screen accesses information not relevant to the contract billing values. It is a
MENU screen. It accesses other dependent MENU screens as shown below:
Screens Text Comments
L40 OPERATIONAL
INDICATORS
To check the proper working of the equipment in all it’s
basic aspects during installation and for subsequent in
situ checks
L41
POWER
CONTRACTS
This is used to indicate the values of the contracted
powers. It only applies to power excesses in Contract 1
L42
TRANSFORMATION
RATIOS
This shows information on transformation ratios
L43 CURRENT VALUES
Shows information on current power, maximum, totals
and power form the last integration period (As a default:
15 minutes)
L44 INSTANT VALUES
This shows information on the instant values of different
electrical magnitudes
L45 COMMUNICATIONS
This shows information on the different parameters of the
communications ports
L46 IDENTIFIERS
This shows information on the equipment's different
identifiers, included those for the IEC870-5-102 protocol
L47
OUTPUT
CONSTANTS
This shows information on the output impulse values
L48 TIME CHANGE This shows information on the dates of the time change.
L49 BACK Returns to the previous screen
4.4.1.4.1.
Screen L40 (INFORMATION: INDICATORS)
This screen shows information on the operating indicators. These are used to check
the proper working of the equipment in all its basic aspects during installation and for
subsequent in situ checks. It is a DATA screen
As these indicators do not correspond to a specific contract, but is data general to all,
field B takes the value 0.
Code
Screen Text
OBIS Sin OBIS
Comments
0.13.38
p.ej. 1
.ACT.Q
ACTIVE QUADRANT : This indicates the
direction of the active or reactive energy or
quadrant (1,2,3 or 4)
0.12.38
p.ej. 123
PRES.V
PRESENCE OF VOLTAGE: Indicates the
presence of voltage in each phase (123 if
there is voltage in all, blank if there is no
voltage)
0.11.38
p.ej. 120
C.DIR
CURRENT DIRECTION : This indicates the
direction of importation (+) or exportation (-
) in each phase (111 if they are imported,
222 if exported, 000 if there is none)
L40 INDICATORS
0.18.128
p.ej. 633
TAR.AC
ACTIVE TARIFF FOR EACH CONTRACT :
This indicates the active tariff at the time of
reading for each contract (contract 1,
contract 2, contract 3)(values form 1 to 6
for each contract)