Circutor CEM-C20, Инструкция по эксплуатации

Страница: 22 / 38

Figure 12: Validation screen�
After a few seconds viewing the screen shown on
Figure 12
, the system returns to the
Impulse
output weight programming main screen.
Minimum value: 99999.
Maximum value: 0.
Short press the button to access the next programming step.
4�7�2� Impulse output type
The impulse output type is selected on this screen, between:
kWh or KVArh�
Short press the button to browse the different options.
To validate the data, long press the button and the validation screen will appear
(
Figure 12
) indicating that the programming value has been saved.
After a few seconds viewing the screen shown on
Figure 12
, the system returns to the Impulse
output type programming main screen.
Short press the button to access the next programming step.
4�7�3� Peripheral address
NB: This is only displayed if there is a
CEM M-RS485
(communications interface for the CEM
family of units) connected to the unit.
This is the home screen for entering the peripheral address.
Long press the button to view the value to be programmed.
22
CEM-C20
Instruction Manual