Circutor CEM-C10, Инструкция по эксплуатации

Страница: 14 / 36

(1)
Only displayed if the reactive energy display option has been selected in the setup menu. (see “ 4.7.6.
Display”
).
The standby mode is activated again when no key is pressed for 60 seconds.
4�4�2� READING MODE DISPLAY
The reading mode is activated by a long press on the key.
In reading mode you can:

View the voltage, current, active power, apparent power and power factor of the installation.

View the energies of the partial energy meters.

Enter the programming menu.

View the manufacturer information.
The navigation diagram is shown in
Figure 7
:
Figure 7: Navigation diagram in reading mode of the CEM-C10�
Note: PC is a short press on the key (< 2 seconds).
PL is a long press ( > 2 seconds).
14
CEM-C10
Instruction Manual