Circutor CEM-C10, Инструкция по эксплуатации

Страница: 13 / 36

4�4�- DISPLAY MODES
The
CEM-C10
has 2 display modes:

Standby mode display

Reading mode display
4�4�1� STANDBY MODE DISPLAY
With the display in standby mode, all of the information is presented in cyclic form without any need
to perform any action on the
CEM-C10
keyboard.
Six different parameters are viewed in this mode, see
Table 5
, in which they alternate every 6 seconds.
The unit is in this mode by default when none of the keys are pressed.
Short press the key to stop the cyclic movement of the parameter being shown at the time.
From then on, short press the key to browse all the parameters defined in
Table 5
.
Table 5: Standby mode displays
Screen Parameters
Total imported active energy
Total exported active energy
Only displayed in the 4-quadrant version.
Reactive energy quadrant L+ total (1)
Reactive energy quadrant L- total (1)
Only displayed in the 4-quadrant version.
Reactive energy quadrant C- total (1)
Only displayed in the 4-quadrant version.
Reactive energy quadrant C+ total (1)
13
Instruction Manual
CEM-C10