Circutor CBS-400B, Инструкция по эксплуатации

Страница: 40 / 58

40
CBS-400B
Instruction Manual
Possible statuses of
WGB
,
Table 15
:
Table 15: WGB statuses�
Possible statuses of WGB
Value Description
0 WGB in startup process
1 WGB
in idle status
2 WGB tripped due to detected leakage current
3 WGB tripped due to TEST with Test error result
4 WGB
tripped due to TEST with Test successful result
5 WGB tripped due to communications
6 WGB tripped due to TRIP input
Function 0x02 is used for these variables.
Table 16: Modbus Memory Map: Status of the Channels�
Parameter Format
Address
Value
Channel
1
Channel
2
Channel
3
Channel
4
Internal error detected in the WGB bool 0000 0028 0050 0078
0: Not detected
1: Detected
Prealarm activated bool 0001 0029 0051 0079
0:
Deactivated
1:
Activated
Channel tripped bool 0002 002A 0052 007A
0: Not tripped
1: Tripped
Channel tripped due to leakage current bool 0003 002B 0053 007B
Channel tripped due to error in the
WGB
bool 0004 002C 0054 007C
Channel tripped due to test bool 0005 002D 0055 007D
Channel tripped due to TRIP input bool 0006 002E 0056 007E
Channel tripped due to communications bool 0007 002F 0057 007F
WGB not connected bool 0008 0030 0058 0080
0: Not detected
1: Detected
WGB does not respond to requests bool 0009 0031 0059 0081
7�3�3�- TRIPPING DUE TO TEST OR COMMUNICATIONS
The following functions are used for these variables: 0x01 and 0x05 .
Table 17: Modbus Memory Map: Configuration of the trip and prealarm�
Configuration of the Trip and Prealarm
Configuration variable Format Address Valid data range Default value
Tripping due to
TEST
of channel 1 bool 07D0
FF00: Activate Test of channel
0000 : Finish TEST 0000
Tripping due to TEST of channel 2 bool 07F8
Tripping due to
TEST
of channel 3 bool 0820
Tripping due to
TEST
of channel 4 bool 0848