Circuit-test PSC-6916, Руководство по эксплуатации

Страница: 5 / 32

5
2. Caution
• Use a grounded 3 pin AC source.
• This unit is for indoor use only.
• Do not operate or place this unit in a humid, dusty, direct sunlight location or
near any heat source.
• Before plugging into local AC mains, check the rating label at the back of the
unit.
• Do not block any ventilation openings of the unit.
• This unit must be used within the specified rating, regular excessive continuous
loading will damage the power supply.
• The gauge size of input power cable must be at least 0.75mm
2
and the total
length of power cable must not exceed 3m.
1. Warning
• Do not use this power supply near water.
• Do not operate or touch this power supply with wet hands.
• Do not open the casing of the power supply when it is connected to AC mains.
• Refer all servicing to qualified service personnel only.
• Replace the AC fuse with the same type and rating as the original fuse.
• Do not touch the metal part of the output terminals.
• This power supply is designed for using in non-cascade environment. It is not
recommended to connect two or more power supplies in parallel or in series.
• Analogue Remote Control or Remote Programming via USB function is only
suitable for stand-alone one unit operation.
• Do not use this power supply with electrical motors, solenoid or inductive load
that generates a back EMF and voltage transient which may damage the power
supply